MAKE AN INFORMED START
A project does not always need to be a complete rebuild. Compare focused refreshes, straightforward replacements and larger renovations, then request an estimate for your home.
PROJECT PLANNING / 01
Find your starting point. Make it your own.
Broader project planning range: $28,500–$57,000
Standard vanity replacement, faucet coordination, light patching and painting; existing room layout retained.
Shower/tub replacement, damaged subfloors and moved plumbing are outside this example.
Standard fixtures, new floor and a basic tub/shower surround with the layout retained.
Custom tile showers, premium fixtures and hidden water damage add scope.
Demolition, ordinary preparation, standard vanity, fixtures, flooring and shower or tub finishes.
Layout changes, large primary baths and extensive repairs may exceed the range.
PROJECT PLANNING / 02
Find your starting point. Make it your own.
Broader project planning range: $38,000–$95,000
Backsplash, flooring, painting and selected finish improvements while sound cabinets stay.
New cabinets, a full appliance package and moved utilities are excluded.
Stock cabinets, standard counters, flooring and installation in a compact existing layout.
Appliances, structural changes and substantial utility upgrades are excluded.
Cabinets, counters, flooring, demolition and agreed finish work with ordinary trade coordination.
Premium cabinetry, major layout changes and structural work increase the budget.
PROJECT PLANNING / 03
Find your starting point. Make it your own.
Broader project planning range: $5,700–$38,000
Simple low platform, conventional site conditions and basic decking/framing.
Stairs, railings, demolition, unusual footings and lighting are priced separately.
A simple low deck, suitable sleeper installation and straightforward access after site review.
Slab correction, extensive demolition, rails, planters and lighting require a specific allowance.
A more involved deck with conventional footings, railings and a straightforward stair layout.
Large stair systems, extensive ground work and custom lighting add scope.
PROJECT PLANNING / 04
Find your starting point. Make it your own.
Broader project planning range: $28,500–$52,500
A limited accessible repair area with ordinary preparation and matching material where available.
Widespread rot, lift requirements and full elevations are outside this example.
Standard vinyl siding on one accessible, uncomplicated wall with ordinary trim.
Opening repairs, extensive removal and concealed damage add cost.
A conventional siding project with ordinary preparation and standard finish details.
House size, complex shape, access, premium trim and hidden repairs affect the total.
PROJECT PLANNING / 05
Find your starting point. Make it your own.
A focused repair with a defined accessible area and standard materials after inspection.
This is not a whole-roof replacement; decking, structural repairs and difficult access add scope.
A small approximately 3 × 5 roof area with ordinary plywood/insulation replacement and membrane finish.
Siding removal, flashing complexity, access equipment and concealed damage need review.
A modest conventional roof, one existing layer, basic disposal and standard shingles.
Roof measurement and inspection required; steepness, height, multiple layers and damaged decking add cost.
PROJECT PLANNING / 06
Find your starting point. Make it your own.
Standard unit replacement in a sound opening with ordinary sealing and trim.
Masonry, rot repair and opening enlargement are additional.
Standard double-hung units in sound, accessible openings.
Premium units, new-construction openings and repairs are additional.
A standard-size replacement unit and ordinary installation in a sound opening.
Premium glazing, hardware, framing changes and concealed repairs add cost.
Removal and replacement of a standard bulkhead on suitable existing concrete with minor finish work.
Major concrete extension, drainage correction and structural repairs are excluded.
PROJECT PLANNING / 07
Find your starting point. Make it your own.
Broader project planning range: $38,000–$81,000
A modest room in a dry, suitable basement: framing, drywall, simple flooring and trim.
Bathrooms, egress, moisture correction and major electrical or HVAC changes are excluded.
A simple existing dry space with conventional framing, finishes and coordinated ordinary trade work.
Multiple rooms, bathrooms, extensive utilities and egress increase the scope.
A broader finishing project with multiple areas and a more involved finish package.
Waterproofing, structural changes and major utility upgrades require separate review.
PROJECT PLANNING / 08
Find your starting point. Make it your own.
Conventional foundation, framing, roof, exterior enclosure and basic finished room connection.
Preliminary scope only; plans, site review, design, permit fees and utility needs must be identified.
Conventional slab/foundation, structure, siding, roofing and standard garage doors.
Extensive site work, loft living space, plumbing and premium finishes are excluded.
Conventional garage construction with an existing-house connection after design review.
Structural alterations, unusual grading, utility relocation and finished living areas can exceed the range.
PROJECT PLANNING / 09
Find your starting point. Make it your own.
Broader project planning range: $600–$2,850
Basic finished-plywood shelving, pine nosing and hanging space.
Drawers, doors, premium paint finish and lighting are additional.
More shelving and hanging sections with straightforward fit-out details.
Complex corners, drawers, cabinets and electrical work add cost.
A defined carpentry feature with standard materials and agreed finish preparation.
Fireplace work, premium cabinetry and lighting require separate scope.
PROJECT PLANNING / 10
Find your starting point. Make it your own.
Standard flooring installation and ordinary trim over a suitable subfloor.
Floor area and product allowance confirmed in writing; leveling and subfloor repair add cost.
A defined repair with new board where needed, tape, mud and sanding.
Painting, extensive insulation, high access and hidden damage are separately scoped.
Standard wall preparation and painting in an accessible room.
Room dimensions, coats and surfaces confirmed first; major repairs and extensive trim add cost.
PROJECT PLANNING / 11
Find your starting point. Make it your own.
Per square foot planning starting point for a straightforward dirt area with light leveling, timber border, stone and basic solar lights.
Minimum job size, drainage, excavation depth, access and quantities confirmed after a visit.
A simple freestanding outdoor feature with conventional materials and ordinary access.
Foundation conditions, permits, roofing, premium finishes and electrical work add scope.
Step dimensions, levels, base preparation and drainage reviewed as a separate part of the outdoor scope.
Request a measured estimate; stair work is not automatically included in the flat-area rate.
PROJECT PLANNING / 12
Find your starting point. Make it your own.
A defined group of minor accessible repairs with ordinary stock materials.
A repair list and photos are needed first; hidden rot and return visits can change the cost.
A clearly defined accessible area with ordinary debris handling and disposal.
Hazardous-material abatement, structural removal and full-room reinstatement are excluded.
A limited accessible affected area with conventional replacement materials and basic reinstatement.
Extent must be assessed; concealed structural damage can exceed this range.
MAKE THE BUDGET WORK HARDER
Does each price include the same preparation, materials, finish level, removal, disposal and related trades? Are permits, owner-supplied items and exclusions clearly identified? A useful price is one you can connect to a useful scope.
Get a written estimate for your home ↗LET’S TALK ABOUT YOUR HOME
